High Performance Alloys (MATS64552)
Unit aims / introduction
The aim of this unit is to apply the principles of phase transformations and physical metallurgy to understand the microstructure, properties, processing and applications of ferrous and non-ferrous engineering alloys.
If you wish to complete a postgraduate qualification in Advanced Engineering Materials, please note that this is classed as an 'optional unit'. This means that you will choose to complete this unit OR Unit 6b Functional and Engineering Ceramics (MATS64562) as part of your unit structure requirement.
Online distance-learning
- February 2011
As the online distance-learning units for the MSc Textile Technology are currently in development, this unit will be available in online distance-learning format from September 2011. This development will not affect you if you are studying for a postgraduate qualification at the standard rate of completion.
Part-time campus based
For start dates for the campus-based version of this unit, please contact the Postgraduate Admissions Team
Unit tutors
- Unit leader – Dr Joe Robson
- Unit e-Tutor – Your e-Tutor, assigned when you start the unit, will act as a group mentor throughout the unit and will guide you through all the learning material.
Study time and method
This unit is delivered as an online distance-learning unit and a campus-based unit. This page concentrates on the online distance-learning version, if you would like information on the campus-based version of this unit, please contact the Postgraduate Admissions Team.
Online distance-learning (part-time)
This unit is delivered online through a virtual learning environment (VLE) system called Blackboard.
Each unit contains 12 study weeks over a 14-week period. Each study week normally comprises five study sessions, corresponding to five working days.
This unit requires approximately 12.5 study hours each week of the unit (excluding break weeks). You are able to study at a time that suits you, but some group discussions may be scheduled by your e-Tutor.
For more information on online distance-learning, please click here
Unit structure - online distance-learning
The unit structure of this unit will shortly be available here. If you would like us to contact you when the information is available, please email mmm@manchester.ac.uk and input MATS64552 Unit Structure into the subject line to help us with your enquiry.
For information on the campus-based version of this unit, please contact the Postgraduate Admissions Team
Assessment
Assessment is a requirement if you are studying a postgraduate qualification. If you choose to take individual units only, the unit assessment is optional.
Assessed coursework
All coursework can be submitted via Blackboard, and feedback from e-Tutors will also be given online.
Unit examination
Formal examinations will take place two or more times each year. An examination will normally be available with six weeks of the unit completion date; you may take the examination at a later date but no more than one year after commencement of the unit.
Examinations can take place at The University of Manchester or at a University approved off-campus location, such as a British Council office / other university.
Please note that The University of Manchester will assist all students in finding a University approved off-campus examination location, but it is ultimately the student's responsibility to find and pay for this. All students are welcome to take their examination at The University of Manchester.
Credits
This is a 15-credit unit which can be built up to lead to a postgraduate qualification.
If you wish to complete a postgraduate qualification in Advanced Engineering Materials, please note that this is classed as an 'optional unit'. This means that you will choose to complete this unit OR Unit 6b Functional and Engineering Ceramics (MATS64562) as part of your unit structure requirement.
MSc Advanced Engineering Materials
This unit forms part of the MSc Advanced Engineering Materials. Other units included in the course are:
- Introduction to Materials Science and Engineering
- Industrial Processing of Materials
- Advanced Composite Materials
- Advanced Analytical Techniques
- Engineering Design and Communication
- Materials Performance Life Cycle Design
- Functional and Engineering Ceramics
Manchester Materials Masters
The MSc Advanced Engineering Materials is one of four courses under the Manchester Materials Masters (MMM) programme. Other MMM MSc courses include:
- MSc Corrosion Control Engineering
- MSc Polymer Materials Science and Engineering
- MSc Textile Technology
Pre-requisites and making an application
There are no formal pre-requisites to study for an individual unit, but we would advise you to have a relevant level of knowledge and understanding of the subject to ensure that you can cope with the postgraduate-level study. If you wish to progress onto a postgraduate qualification following completion of an individual unit, then you will need to complete a formal application.
To make an application to an individual unit or to a postgraduate qualification, please click here
Contact us
If you have any questions regarding this unit or other units and courses within the School of Materials, please contact our MMM Team:
- mmm@manchester.ac.uk
- Tel: +44 (0)161 306 4869
Contact us
If you have any questions regarding this unit or other units and courses within the School of Materials, please contact our MMM Team:
- mmm@manchester.ac.uk
- Tel: +44 (0)161 306 4869
Fees
The tuition fees for units starting after February 2010 have not yet been set.
As a guide, tuition fees for current 15-credit units are set at £1,900 for the full 12-week unit.
Your registration includes full access to the teaching material on Blackboard and allocated e-Tutor support throughout the programme.